How to Load and Use a Gel Blaster: A Beginner’s Guide (2024)

How to Load and Use a Gel Blaster

Gel blasters (or gel guns) are fun, safe, and easy to use—but proper loading and handling are key for the best performance. Whether you own a GelToyNation GTN-X5 or a basic SplatRBall, this guide covers everything from gel ball prep to firing techniques.

 What You’ll Need

Before starting, gather:
 Gel blaster (e.g., GelToyNation’s M4A1)
 Gel balls (7–8mm size, best quality)
 Water (for soaking gels)
 Batteries (if electric) or green gas (if gas-powered)
 Protective goggles (safety first!)

 Step 1: Preparing Gel Balls

Gel blasters shoot water-absorbent polymer balls, which must be soaked first.

How to Soak Gel Balls Properly

1. Add gels to a bowl of clean water (1 cup water per 10,000 gels).

2. Soak for 3–4 hours (or overnight for best results).

3. Drain excess water – They should be 7–8mm in size (not too swollen).

4. Store in a sealed bag (prevents drying).

 Avoid:

• Over-soaking (causes jams).

• Reusing old, shrunken gels.

 Step 2: Loading the Gel Blaster

H3: For Electric Blasters (e.g., GTN M4A1)

1. Insert the battery (if removable).

2. Fill the magazine:

   • Open the hopper/magazine lid.

   • Pour in gel balls (don’t overfill).

   • Close securely.

3. Prime the blaster (pull the charging handle if applicable).

 For Manual Spring Blasters

1. Pull back the slide/bolt to open the chamber.

2. Drop gels into the chamber (one at a time or via magazine).

3. Release the slide to chamber the first gel.

 Step 3: Firing Your Gel Blaster

1. Turn on the safety (if equipped) until ready to shoot.

2. Aim carefully – Gel balls can travel 150–250 FPS.

3. Fire in short bursts (automatic) or single shots (spring-powered).

4. Reload when empty – Listen for misfires or dry clicks.

 Pro Tip:

• For better accuracy, adjust the hop-up (if your model has one).

 Gel Blaster Maintenance & Safety

H3: Cleaning & Storage

• After use, wipe down with a dry cloth.

• Remove gels from the magazine to prevent swelling.

• Store in a dry place (avoid humidity).

 Safety Rules

 Always wear eye protection.
 Never point at people’s faces.
 Check local laws (some areas restrict gel blasters).

 Best Gel Blasters from GelToyNation

 Shop Now: GelToyNation.com

 Troubleshooting Common Issues

 Jamming:

• Use properly sized gels (not overgrown).

• Clean the barrel with a soft rod.

 Weak Shots:

• Check battery/gas levels.

• Replace old gel balls.

 Final Thoughts

Gel blasters are easy to use but require proper care. Follow this guide to load, shoot, and maintain your blaster for maximum fun!

Ready to play? Browse GelToyNation’s top-rated blasters today!